Xiamen Sunrise Automation Technology Co., Ltd
Xiamen Sunrise Automation Technology Co., Ltd
Add to Cart
Product Description:
The AVENTICS Series NL maintenance units are incredibly adaptable, fitting seamlessly into any compressed air setup. Whether you need individual components or a fully - assembled solution, for centralized or decentralized systems, they're the perfect choice. Available in compact and powerful models, they operate efficiently in both high and low temperatures. The AVENTICS Pressure regulator, Series NL4 – RGS – 0821302505, is a vital part of this series. It offers precise pressure control, ensuring that your compressed air system maintains optimal performance. Thanks to the Series NL's unique ability to combine components, you can customize your setup to match your specific application requirements. This makes AVENTICS a go - to for reliable, tailored compressed air preparation solutions.
Product Features:
DESCRIPTION:
| Activation | Mechanical |
| Parts | Pressure regulator |
| Relieving exhaust | with relieving air exhaust |
| Pressure gauge | with pressure gauge |
| Housing | Die cast zinc |
| Sealing material | Acrylonitrile butadiene rubber |
| suitable for ATEX | |
| Nominal flow Qn | 9500 l/min |
| Compressed air connection | G 1/2 |
| Parts | Pressure regulator |
| Mounting orientation | Any |
| Certificates | suitable for ATEX |
| Working pressure min./max. | See table |
| Ambient temperature min./max. | -10 … 60 °C |
| Medium temperature min./max. | -10 … 60 °C |
| Medium | Compressed air Neutral gases |
| Regulator type | Diaphragm-type pressure regulator Can be assembled into blocks |
| Regulator function | with relieving air exhaust |
| Adjustment range min./max. | See table |
| Pressure supply | single |
| Activation | Mechanical |
| Weight | See table |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. The rear pressure gauge connection on the pressure regulator is closed with a blanking plug, the front connection is open. Depending on the customer application, a second blanking plug may be necessary. Please order separately (see accessories). Relieving exhaust (? 0.3 bar over set pressure). With rear exhaust (> 3 bar ). | |
| Recommended pre-filtering | 5 µm |
| Material |
|---|
| Housing | Die cast zinc |
| Front plate | Acrylonitrile butadiene styrene |
| Seals | Acrylonitrile butadiene rubber |
Product Details:
